Faq

  • Q: How to Install and Use Art Ethanol Fires

    Penyongsang Gelombang Sinus Tulen Rumah:

    For all of you who failed to enjoy the pleasure of a fireplace because of a modest environment like a condo or an apartment, or simply because it is not allowed, there now is an alternative. Art Bioethanol fireplaces offer a unique and ecological way for you to enjoy the warmth and comfort you are looking for.
    How to Install and Use the automatic interlligent bio ethanol fires?

    The Structure and Design of Art Ethanol Burner:

    1.All our products come with 1 handset and 1 power adaptor amd Spare parts.

    2.Install the burner steadly.

    3.Connect Power Supply to the Burner.

    All our products come with power adaptor with plug

    An adapter is provided with your fireplace:INPUT 100-240 volt 50/60 Hz and OUTPUT 12V/7A or 12V 10A.

    Before positioning,the device must be connected with the supplied adapter to the power supply.

    4.Open the tank door,add moderate alcohol to stainless steel burner.

    Notice:You absolutely need to close the tank trap door if you want to ignite your ethanol fireplace.For sercurity reasons a system will check and lock the trap door before ignition.If the tank door is not closed,the LED screen will show”Door″.So after filling the ethanol tank,you need closed the tank door before using the thanol fireplace devices.

    5.Press the switch ON/OFF DURING 5 SECONDS or press on the remote control.after a few seconds an automatic ignition will take place.

    Operation of Igniting the bio ethanol fireplaces:

    1.Press the right button under the LED during FIVE SECONDS.
    2.The LED will show the operating time.
    3.the Pump will operate to pump the bioethanol into the trough of the fireplace.
    4.Then the igniter will work to ignite the ethanol.
    5.the temperature get above 78℃,it will ignite the ethanol.
    For the first the fireplace is used,we suggest to fill up the tank until it is full.
    Because when the burner is new,there is air inside the pump and the pipe,
    so it is a little bit difficult for the pump to pump the ethanol to the fireplace Trough.
    If the tank is full ,the pressure of the liquid could push the air out from the pump and the pipe,
    then the pump can work normal.
    So Our suggestion is to fill up the tank until it is full,and try to start the burner again.

     

    If the problem still exists, you need to open the fireplace, the step is as below:

    1.Clean all the ethanol out from the tank, make sure the tank is empty.
    2.Lossen the screws which are used to fis the top plate and the black box.
    3.Take the top plate out from the black box.But when you try to take the top plate out from the black box ,please
    pay attention,because there is two wires connceted between the top plate and the black box,you need to disconnect these two wires.
    4.The pump system is on the one side of the fireplace.The main problem is the air inside the pump,so Please try to push some liquid inside the pipe which is connected between the pump and the tank,then the pump could work normal.

    About Restart of Art fireplace with safety function:

    After shutting the fireplace,the Alcohol Tray is hot.If you want to restart,you need to wait arround 5 minutes until the temperature of the tray is bellow 60℃If you start it immediately after shut off the fireplace,the “TEMP” will show on the LED screen.

  • Q: How to Install An Art Vapor Fire Device

    Penyongsang Gelombang Sinus Tulen Rumah:

    To make the vapor fireplace insert, anda hanya boleh menggunakan yang komersial yang sudah tersedia di pasaran. Pasukan Art Vapor Fire Fokus pada Kebakaran Pintar Selama lebih daripada 10 tahun.Kualiti dan Teknologi boleh dipercayai dengan nilai yang hebat.
    1.Prepare the housing with cutout exactly to the specifications provided.10mm wider than the drawings for the housing.
    Untuk memasang perapian wap Seni, anda perlu membuat perumahan (permukaan yang akan menyokong sisipan perapian).

    2.Biarkan lubang atau celah untuk pengambilan udara di bawah perapian.
    Orang ramai boleh menggunakan api wap di banyak tempat yang berbeza dengan hiasan yang berbeza,untuk reka bentuk pendiangan tradisional dengan/tanpa kayu balak atau untuk reka bentuk moden dengan/tanpa cermin mata di sekelilingnya,
    Untuk reka bentuk yang berbeza,kita harus memastikan jika terdapat pengambilan udara yang mencukupi di bawah perapian untuk membiarkan wap naik ke atas.
    3.Pasangkan sistem dan masukkannya ke dalam perumahan.
    Salur keluar elektrik Volt piawai diperlukan. (terbaik terletak di dalam perumahan). Sistem ini dilengkapi dengan 100/240V (50-60 Hz) – Penyesuai kuasa tersenarai 24V UL (penukar).
    Tidak seperti sistem kebakaran wap lain,Api wap Art Fire berfungsi dengan sistem voltan rendah,jadi ia lebih selamat.

    Kalau orang nak sambung paip air ke pendiangan,orang ramai boleh menyediakan tiub plastik air dari sistem paip air di perumahan dan menyambungkannya ke pendiangan.
    Hidupkan paip,air akan masuk ke dalam perapian secara automatik.Apabila sampai ke tahap semangat,ia akan menghentikan suntikan. Jadi orang tidak perlu menambah air ke dalam perapian secara manual lagi.

    Seperti yang anda boleh lihat, tidaklah sukar untuk membina perapian wap air anda sendiri. pasti, anda akan menghabiskan lebih banyak masa untuk memasang segala-galanya.
    Jadi, adakah ia benar-benar berbaloi pada akhirnya? Baiklah, itu semua bergantung pada kemahiran kerajinan anda dan bajet anda.

    Kesimpulan umum
    Perapian tiruan wap air adalah alat sejuk yang pastinya akan menghiburkan tetamu anda! Anda kini juga boleh menarik perhatian mereka dengan menerangkan sains di sebalik pendiangan palsu ini! I hope that you enjoyed this review. If you want to know more functions and guidelines about Art water vapor fires,please contact us freely.

    Email us at : [email protected] We will reply you within 12hours.

  • Q: How to Purchase Art Fire Devices

    Penyongsang Gelombang Sinus Tulen Rumah:

    Art Fireplace mengedarkan produknya di lebih daripada 100 negara dan dihantar ke mana sahaja di dunia. To find out where to purchase an Art Fireplace fireplace or insert, sila isi borang yang anda dapati di halaman hubungan. Ejen Art Fireplace akan menjawab anda melalui e-mel dalam 12 jam bersama dengan katalog dan harga.
    Sekiranya permintaan anda lebih tepat dan merangkumi satu atau lebih model tertentu, jangan teragak-agak untuk menyebutnya di borang hubungan. Kami kemudian akan menghantar kepada anda keterangan teknikal khusus produk tersebut, gambarajah pemasangan dengan ukuran yang harus dipatuhi serta anggaran termasuk kos penghantaran.

    Is sample order available?
    For New distributors,we are pleased to offer a sample unit for first cooperation.

    How do I order and pay?
    After receiving your estimate and if you want to place an order, please send us:
    Your delivery address including postal code (plus a billing address if different).
    A telephone number for the deliverer.
    A copy of your payment
    Full payment on ordering:
    By bank transfer, with no fees
    Using the bank information provided on the estimate, please send us a copy so we can immediately proceed to ship your package.
    By PAYPAL using your credit card(+4%)
    If you choose this solution, please ask us for the PayPal invoice.
    This invoice will be sent to you within 24 hours by email.
    Follow the link included to pay directly on the secured PayPal platform.
    As soon as your payment is made, we will be informed directly and will ship out your order.
    The PayPal company will guarantee the delivery of your order

    How long does delivery take?
    Art Fireplace is a manufacturer, so it manages production and has a wide inventory.
    The products are shipped by large specialized companies such as DHL, TNT, UPS, Penyongsang Gelombang Sinus Tulen Rumah.
    Generally, inserts and fireplaces are delivered within ten working days.
    For big order,we recommand shipping by sea.

  • Q: Function Features of Art Electronic Ethanol Fire Models

    Penyongsang Gelombang Sinus Tulen Rumah:

    With an Art electronic ethanol fireplace, lighting is done automatically, by simply pressing a button ON/OFF. There is no need to bring your hands near the flame. Also, this means you’re only lighting a few centiliters of the combustible injected by the pump and not the entire quantity of ethanol like in a manual reservoir burner.

    Art Ethanol Fire Models Featured Functions:
    1.Intelligent ethanol burner extinction or ignition ordered by electric board and a Button ON/OFF and remote control.
    2.Fungsi suntikan pengisian automatik dan suntikan pengisian manual untuk pembakar.
    3. Bahan dalam tahan karat dan MDF.
    4. Tangki bio-etanol secara berasingan dan perapian terbakar.
    5. Pengesan inframerah keselamatan Co2 yang menghentikan kebakaran sekiranya mencapai tahap yang tidak dibenarkan.
    6.Fungsi mati jika pembakar digerakkan oleh daya luaran.
    7. Automatic electric pump to fill the combustion tray of the burner.
    8. Dengan alat pengesan haba elektronik, ia akan pupus secara automatik apabila suhu mencapai tahap yang tidak dibenarkan.
    9. Pengecas AC atau pengecas bateri dengan pemuat bateri.
    10, Dengan kesan audio.
    11. Fungsi Kunci Kanak-kanak.

    Inspirasi api ekologi: campuran budaya dan atmosfera! Ini akan menjadi idea bagus untuk reka bentuk ruang api dalaman yang super!
    Kami dapat menyusun semua hiasan dengan alat api baru ini. Idea yang bagus untuk memiliki perapian bio etanol pintar moden!
    Bawalah suasana perapian yang indah di rumah anda dan nikmati keselesaan yang murni.
    Dengan api perapian etanol seni, Duduk bersama, Berkongsi Kebahagiaan dan Kejayaan dengan Keluarga dan Pasangan anda sambil minum wain merah, Bercakap, Bermain, Ketawa ... Itu pasti Hebat!!!

Hantarkan mesej anda kepada kami:

TANYA SEKARANG
TANYA SEKARANG