Faq

  • Q: How to Install and Use Art Ethanol Fires

    EN:

    For all of you who failed to enjoy the pleasure of a fireplace because of a modest environment like a condo or an apartment, or simply because it is not allowed, there now is an alternative. Art Bioethanol fireplaces offer a unique and ecological way for you to enjoy the warmth and comfort you are looking for.
    How to Install and Use the automatic interlligent bio ethanol fires?

    The Structure and Design of Art Ethanol Burner:

    1.All our products come with 1 handset and 1 power adaptor amd Spare parts.

    2.Install the burner steadly.

    3.Connect Power Supply to the Burner.

    All our products come with power adaptor with plug

    An adapter is provided with your fireplace:INPUT 100-240 volt 50/60 Hz and OUTPUT 12V/7A or 12V 10A.

    Before positioning,the device must be connected with the supplied adapter to the power supply.

    4.Open the tank door,add moderate alcohol to stainless steel burner.

    Notice:You absolutely need to close the tank trap door if you want to ignite your ethanol fireplace.For sercurity reasons a system will check and lock the trap door before ignition.If the tank door is not closed,the LED screen will show”Door″.So after filling the ethanol tank,you need closed the tank door before using the thanol fireplace devices.

    5.Press the switch ON/OFF DURING 5 SECONDS or press on the remote control.after a few seconds an automatic ignition will take place.

    Operation of Igniting the bio ethanol fireplaces:

    1.Press the right button under the LED during FIVE SECONDS.
    2.The LED will show the operating time.
    3.the Pump will operate to pump the bioethanol into the trough of the fireplace.
    4.Then the igniter will work to ignite the ethanol.
    5.the temperature get above 78℃,it will ignite the ethanol.
    For the first the fireplace is used,we suggest to fill up the tank until it is full.
    Because when the burner is new,there is air inside the pump and the pipe,
    so it is a little bit difficult for the pump to pump the ethanol to the fireplace Trough.
    If the tank is full ,the pressure of the liquid could push the air out from the pump and the pipe,
    then the pump can work normal.
    So Our suggestion is to fill up the tank until it is full,and try to start the burner again.

     

    If the problem still exists, you need to open the fireplace, the step is as below:

    1.Clean all the ethanol out from the tank, make sure the tank is empty.
    2.Lossen the screws which are used to fis the top plate and the black box.
    3.Take the top plate out from the black box.But when you try to take the top plate out from the black box ,please
    pay attention,because there is two wires connceted between the top plate and the black box,you need to disconnect these two wires.
    4.The pump system is on the one side of the fireplace.The main problem is the air inside the pump,so Please try to push some liquid inside the pipe which is connected between the pump and the tank,then the pump could work normal.

    About Restart of Art fireplace with safety function:

    After shutting the fireplace,the Alcohol Tray is hot.If you want to restart,you need to wait arround 5 minutes until the temperature of the tray is bellow 60℃If you start it immediately after shut off the fireplace,the “TEMP” will show on the LED screen.

  • Q: How to Install An Art Vapor Fire Device

    EN:

    To make the vapor fireplace insert, du kan simpelthen bruge kommercielle dem, der allerede er tilgængelige på markedet. Art Vapor Fire Team Fokus på Intelligent Fire For mere end 10 år. Kvaliteten og teknologien er pålidelig med stor værdi.
    1.Prepare the housing with cutout exactly to the specifications provided.10mm wider than the drawings for the housing.
    For at installere en Art vapor pejs, du skal skabe en bolig (en overflade, der skal understøtte pejseindsatsen).

    2.Efterlad huller eller huller til luftindtag under pejsene.
    Folk kan bruge dampbrande mange forskellige steder med forskellige dekorationer,til traditionelle pejsedesign med/uden brænde eller til moderne design med/uden glas rundt,
    Til forskellige designs,vi bør sikre os, om der er nok luftindtag under pejsen til at lade dampen gå opad.
    3.Tilslut systemet og sæt det ind i huset.
    En standard Volt stikkontakt er påkrævet. (bedst placeret inde i huset). Systemet leveres med en 100/240V (50-60 Hz) – 24V UL-listet strømadapter (konverter).
    I modsætning til andre dampbrandsystemer,An Art Fire vapor fire works with a low voltage system,så det er meget mere sikkert.

    Hvis folk vil forbinde vandrøret til pejsen,folk kan forberede et vandplastrør fra vandrørsystemet i huset og forbinde det til pejsen.
    Tænd for vandhanen,vand kommer automatisk ind i pejsen. Når det kommer til et vaterpas,det vil stoppe injektionen. Så folk behøver ikke længere at tilføje vand til pejsen manuelt.

    Som du kan se, it is not that hard to build your own water vapor fireplace. Jo da, du vil bruge mere tid på at installere alt.
    Så, er det virkelig det værd i sidste ende? Godt, det hele afhænger af dine håndværksevner og dit budget.

    Generelle konklusioner
    Vanddamp kunstige pejse er fede gadgets, der helt sikkert vil underholde dine gæster! Du kan nu også imponere dem ved at forklare videnskaben bag disse falske pejse! I hope that you enjoyed this review. If you want to know more functions and guidelines about Art water vapor fires,please contact us freely.

    Email us at : [email protected] We will reply you within 12hours.

  • Q: How to Purchase Art Fire Devices

    EN:

    Art Fireplace distribuerer sine produkter i mere end 100 lande og leverer til hvor som helst i verden. To find out where to purchase an Art Fireplace fireplace or insert, udfyld formularen, du kan finde på kontaktsiden. En Art Fireplace-agent vil svare dig via e-mail indeni 12 timer sammen med et katalog og priser.
    Hvis din anmodning er mere præcis og inkluderer en eller flere bestemte modeller, tøv ikke med at nævne dem på kontaktformularen. Vi sender dig derefter den specifikke tekniske beskrivelse af det produkt, et installationsdiagram med de mål, der skal respekteres, samt et skøn inklusive leveringsomkostninger.

    Is sample order available?
    For New distributors,we are pleased to offer a sample unit for first cooperation.

    Hvordan bestiller jeg og betaler?
    Efter modtagelse af dit skøn, og hvis du vil afgive en ordre, send os venligst:
    Din leveringsadresse inklusive postnummer (plus en faktureringsadresse, hvis den er anderledes).
    Et telefonnummer til aflevereren.
    En kopi af din betaling
    Fuld betaling ved bestilling:
    Ved bankoverførsel, uden gebyrer
    Brug af bankoplysningerne på estimatet, send os en kopi, så vi straks kan fortsætte med at sende din pakke.
    Ved at bruge PAYPAL med dit kreditkort(+4%)
    Hvis du vælger denne løsning, bed os om PayPal-fakturaen.
    This invoice will be sent to you within 24 hours by email.
    Follow the link included to pay directly on the secured PayPal platform.
    As soon as your payment is made, we will be informed directly and will ship out your order.
    The PayPal company will guarantee the delivery of your order

    How long does delivery take?
    Art Fireplace is a manufacturer, so it manages production and has a wide inventory.
    Produkterne afsendes af store specialiserede virksomheder som DHL, TNT, UPS, etc.
    Generally, indsatser og pejse leveres inden for ti arbejdsdage.
    For big order,we recommand shipping by sea.

  • Q: Function Features of Art Electronic Ethanol Fire Models

    EN:

    With an Art electronic ethanol fireplace, lighting is done automatically, by simply pressing a button ON/OFF. There is no need to bring your hands near the flame. Also, this means you’re only lighting a few centiliters of the combustible injected by the pump and not the entire quantity of ethanol like in a manual reservoir burner.

    Art Ethanol Fire Models Featured Functions:
    1.Intelligent ethanolbrænderudryddelse eller -antændelse bestilt af el-kort og en knap til / fra og fjernbetjening.
    2.Automatisk fyldindsprøjtning og manuel fyldningsindsprøjtning til brænderen.
    3. Materiale i rustfrit stål og MDF.
    4. Separat bio-ethanoltank og brændende ildsted.
    5. Co2 Sikkerhedsinfrarød detektor, der standser ilden i tilfælde af, at der nås uautoriserede niveauer.
    6.Afbryd funktionen, hvis brænderen bevæges med ekstern kraft.
    7. Automatisk elektrisk pumpe til fyldning af brænderens forbrændingsbakke.
    8. Med elektroniske varmedetektorer, det slukker automatisk, når temperaturen når de uautoriserede niveauer.
    9. AC-oplader eller batterioplader med batterilæsser.
    10, Med lydeffekt.
    11. Børnesikringsfunktion.

    Inspirationer økologisk brand: blandingen af ​​kulturer og atmosfærer! Dette vil være en god idé til super indvendigt brandrumdesign!
    Vi kan udtænke alle dekorationer med disse nye brand-enheder. Virkelig god idé at eje en moderne intelligent bioethanol pejs!
    Medbring den intime atmosfære i denne smukke pejs i dit hjem og nyd den rene hygge.
    Med flammer af kunst ethanol Pejs, Sidder sammen, Dele lykke og succes med din familie og partnere, mens du drikker rødvin, Taler, Spiller, Griner ... Det må være fantastisk!!!

Send din besked til os:

FORESPØRGSEL NU
FORESPØRGSEL NU