How to use an ultrasonic mist module to make your own opti-myst fireplace
As you can see, All nar tal-fwar tal-ilma has a really neat design. Despite their fancy name, ultrasonic fireplaces are not that complex. The technology rely on a simple mist maker module. Barra minn hekk, these mist makers are easy to use. The ultrasonic module replacement part for Art Fireplace models can be relatively expansive. Therefore, I would instead suggest you to buy cheaper mist makers that could easily get the job done for a fraction of the price. Please have a look at my previous post to learn more about these ultrasonic mist makers.
Li jmiss, you need to make a reservoir to accommodate the mist maker. The design could be similar to the Art Fire fireplace video shown above. The next video by Old Ben is another example of a good configuration that you could use for this DIY nar tal-fwar tal-ilma. In this one, a small computer fan is also used to push the mist towards the LED lights to create the fake flame illusion.
How to build Art Vapor Fires insert
To make the fireplace insert, you could simply use commercial ones already available on the market. Art Vapor Fire Team Focus on Intelligent Fires For more than 10 years.The quality and Technology are reliable with great value.
1.Prepare the housing with cutout exactlt to the specifications provided.10mm wider than the drawings for the housing.
To install an Art vapor fireplace, you need to create a housing (a surface that will support the fireplace insert).
2.Leave holes or gaps for air intake bellow the fireplaces.
People may use vapor fires in many different places with different decorations,for traditional fireplace designs with/without logs or for modern designs with/without glasses arround,
For different designs,we should make sure if there is enough air intake bellow the fireplace to let the vapor go upwards.
3.Plug in the system and insert it into the housing.
A standarded Volt electrical outlet is required. (best located inside the housing). The system comes with a 100/240V (50-60 Hz) – 24V UL Listed power adapter (converter).
Unlike other vapor fire systems, Art Fire vapor fire works with a low voltage system, so it is much safer.
4.Fill the tank with tap water (or hook up the system to plumbing)
If people want to connect the water pipe to the fireplace,people can prepare a water plastic tube from the water pipe system in the housing and connect it to the fireplace.
Turn on the faucet,water will comes into the fireplace automatically.When it comes to a spirit level,it will stop injection.So people no need to add water into the fireplace manually any more.
As you can see, it is not that hard to build your own nar tal-fwar tal-ilma. Sure, you will spend more time to install everything.
So, is it really worth it in the end? Well, that all depends on your crafting skills and your budget.
We Recommand People buy the device first,and then make the constructions.
As you can see, All water vapor fireplace has a really neat design. Both Led and ULT are important.LED must be water proof and bright enough. ULT should have stainless steel materials body. Ultrasonic fireplaces are not too much complex. The technology rely on a mist maker module. Barra minn hekk, these mist makers are easy to use. Dawk li jfasslu ċ-ċpar jeħtieġu xogħol taħt kwalità ta 'ilma tajba.
Konklużjonijiet ġenerali,Il-fuklari artifiċjali tal-fwar tal-ilma huma aġġeġġi friski li żgur ser divertiment lill-mistednin tiegħek! Issa tista 'wkoll timpressjonahom billi tispjega x-xjenza wara dawn il-fuklari foloz!
Art Fireplace Team are pleased to answer any questions about how to diy your water vapor fires. We have professional engineers and designers who own more than 15 years experiences to support you.
Ħin tal-post: 2021-10-27
